LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2017 >> CT6 Plug-In >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Antilock Brake System - Hybrid >> Diagnostic Information and Procedures >> DTC C10EA: Powertrain Control Module Indicated Requested Torque >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Vehicle in Service Mode.
  2. Verify that no other DTCs are set except for C10EA.
    • If no other DTCs are set 
  3. Replace the K20 Engine Control Module.
  4. Verify that DTC C10EA does not set while operating the vehicle under the Conditions for Running the DTC. You may also operate the vehicle under the conditions that you observed from the Freeze Frame/Failure Records data.
    • If DTC C10EA sets 

      Replace the K17 Electronic Brake Control Module.

    • If DTC C10EA does not set 
  5. All OK.