Circuit/System Verification

Verify there are no immobilizer DTCs set in the K9 Body Control Module.
- If any immobilizer DTCs are set in the K9 Body Control Module
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no immobilizer DTCs are set in the K9 Body Control Module
Perform the K9 Body Control Module immobilizer learn using the body control module IMMO Function with Existing Transponder or Remote Key in SPS. Refer to Immobilizer System Component Programming .
Verify the engine starts after the K9 Body Control Module completes the learn procedure.
- If the engine does not start
  Perform the K20 Engine Control Module immobilizer learn using the engine control module IMMO Learn in SPS. Refer to Immobilizer System Component Programming .
- If the engine starts
All OK.