Circuit/System Verification
- Vehicle ON.
- Verify no other Hybrid Transmission DTCs are set.
- If other Hybrid Transmission DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no other Hybrid Transmission DTCs are set
- If other Hybrid Transmission DTCs are set
- Verify DTC P1B0D or P1B0E is not set.
- If any of the DTCs are set
- Program the T6 Power Inverter Module.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets, replace the T6 Power Inverter Module.
- If the DTC does not set.
- All OK
- If none of the DTCs are set
- All OK