Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal.
|
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Auxiliary A/C Evaporator Tube Bracket Fastener | 9 N.m (80 lb in) |
| Battery Distribution Fuse Block Cover Fastener | 9 N.m (80 lb in) |
| Battery Hold Down Bolt | 22 N.m (16 lb ft) |
| Battery Hold Down Strap Fastener | 9 N.m (80 lb in) |
| Battery Negative Cable Ground Bolt | 4.0 N.m (35 lb in) |
| Battery Positive Cable to Battery Distribution Fuse Block Nut | 15 N.m (11 lb ft) |
| Battery Post Negative Cable Clamp Nut | 4.5 N.m (40 lb in) |
| Battery Post Positive Cable Clamp Nut | 6 N.m (53 lb in) |
| Generator Cable to Accessory DC Power Control Module Fastener | 12 N.m (106 lb in) |
| Generator Cable to Battery Distribution Engine Compartment Fuse Block Fastener | 12 N.m (106 lb in) |