Component Testing

Relay Test

1. Ignition OFF, disconnect the appropriate relay.
2. Test for 70-150 Ω between terminals (85 or 1) and (86 or 2).
   • If less than 70 or greater than 150 Ω 

     Replace the relay.

   • If between 70-150 Ω 
3. Test for infinite resistance between the terminals listed below:
   • (30 or 3) and (86 or 2)
   • (30 or 3) and (87 or 5)
   • (30 or 3) and (85 or 1)
   • (85 or 1) and (87 or 5)
   • (86 or 2) and (87 or 5)
   • If less than infinite resistance 

     Replace the relay.

   • If infinite resistance 
4. Install a 3 A fused jumper wire between relay terminal (85 or 1) and 12 V. Install a jumper wire between relay terminal (86 or 2) and ground.
5. Test for less than 5.0 Ω between terminals (30 or 3) and (87 or 5).
   • If 5.0 Ω or greater 

     Replace the relay.

   • If less than 5.0 Ω 
6. All OK