Installation Procedure
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- With an assistant, install the windshield (1) and locator pins (2) into the opening. Refer to Adhesive Installation of Windshields .
- Install the outside moisture sensor. Refer to Windshield Outside Moisture/Ambient Light and Humidity Sensor Replacement .
- Install the camera. Refer to Front View Camera Replacement (With UFL) , Front View Camera Replacement (With UGN) and/or Front View Camera Replacement (With UQT) .
- Install the inside rearview mirror. Refer to Inside Rearview Mirror Replacement .
- Install the front section of the headliner. Refer to Headlining Trim Panel Replacement (With Sunroof) .
- Install the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement .
- Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
- Install the windshield side reveal molding. Refer to Windshield Side Reveal Molding Replacement .
- Install the windshield wipers arms. Refer to Windshield Wiper Arm Replacement .
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Close the hood.