LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2017 >> CTS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Programming And Setup - All Systems - Sedan) >> Repair Instructions >> K71 Transmission Control Module: Programming and Setup (TL-80SN (MGG)) >> Unsuccessful Programming Recovery
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Unsuccessful Programming Recovery

WARNING: This page is about a different car, the 2015 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

If programming a control module is not successful, perform the following procedure:

  1. Verify the control module, data link connector and programming tool connections are secure and the SPS software is up to date.
  2. Ignition On/Vehicle in Service Mode.
  3. Perform the SPS function:Reprogram ECU<!--T2W2-->

    Verify the control module programming is successful.

    • If the programming is not successful 
    1. Ignition/Vehicle Off for greater than <p01> min.
    2. Ignition On/Vehicle in Service Mode.
    3. Perform the SPS function:Reprogram ECU<!--T2W2-->
      • If the programming is not successful, replace the component: K71 Transmission Control Module
      • If the programming is successful
    4. All OK.
    • If the programming is successful 
  4. All OK..
scientia non olet · About LEMON Manuals