Removal Procedure

WARNING: This page is about a different car, the 2015 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Object Sensor Housing

Courtesy of GENERAL MOTORS COMPANY

Remove rear bumper fascia. Refer to. Rear Bumper Fascia Replacement
Disconnect electrical from the rear object sensor.

NOTE:

The rear object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia/bumper body color.

Lift the locking tabs on the housing and remove the rear object sensor.