Fuel Pump Power Control Module Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Fuel Pump Power Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Raise and support vehicle. Refer to Lifting and Jacking the Vehicle (CTS)Lifting and Jacking the Vehicle (CTS-V) .
1	Fuel Pump Power Control Module Fastener (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Unclip the electrical harness from the fuel pump control module mounting stud. Tighten 9 N.m(80 lb in)
2	Fuel Pump Power Control Module Procedure Disconnect the electrical connector. If replacing, reprogram the control module. Refer to Service Programming System (SPS) .

Callout

Component Name

Fuel Pump Power Control Module Fastener (Qty: 2)

CAUTION:

Procedure

Tighten
9 N.m(80 lb in)

Fuel Pump Power Control Module

Procedure

Disconnect the electrical connector.
If replacing, reprogram the control module. Refer to Service Programming System (SPS) .