LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2017 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 223 (Object Detection System And Pedestrian Protection System - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC B0954, B0955, B0956 or B0957: Parking Assist Front Sensor >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify that DTC B1405 is not set.
    • If the DTC is not set 
  3. Verify that DTC B0954 3A, DTC B0954 3B, B0955 3A, B0955 3B, B0956 3A, B0956 3B, B0957 3A or B0957 3B is not set.
    • If the DTC is set 

      Replace the B78 Front Object Sensor.

    • If the DTC is not set 
  4. Verify that DTC B0954, B0955, B0956 or B0957 is not set.
    • If the DTC is set 
    1. Verify the B78 Front Object Sensors are not contaminated with snow, mud, dirt, slush or ice.
      • If contaminated, clean sensor.
      • If there is no contamination
    2. Refer to Circuit/System Testing.
    • If the DTC is not set 
  5. Ignition ON, transmission in REVERSE.
  6. Verify the scan tool Parking Assist System Status parameter displays Enabled.
    • If the Parking Assist System displays Disabled 

      Refer to Circuit/System Testing.

    • If the Parking Assist System displays Enabled 
  7. All OK.