Auxiliary Audio Input Jack
WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Verify no DTCs are present.
- If any DTCs are present
- If no DTCs are present
- Ignition ON, infotainment system ON.
- Connect the EL-50334-20 Multi-Media Interface Tester (MIT) to the X83 Auxiliary Audio Input 3.5 mm (1/8 in.) input jack and select the AUX test mode.
- Verify that AUX becomes an available media selection to the infotainment system.
- If AUX does not become an available media selection
Refer to Circuit/System Testing - Auxiliary Audio Input Jack.
- If AUX becomes an available media selection
- If AUX does not become an available media selection
- Verify the audio from the EL-50334-20 Multi-Media Interface Tester (MIT) is heard through the infotainment system while operating the system to play audio from the test tool.
- If audio is not heard from the test tool.
Refer to Circuit/System Testing - Auxiliary Audio Input Jack.
- If audio is heard from the test tool.
- If audio is not heard from the test tool.
- All OK