Component Testing
- Ignition OFF, disconnect the harness connector at the Q4 Vehicle Level Control Solenoid Valve.
- Test for 18 - 45 Ω between the control terminal B and the ignition terminal B.
- If not between 18 - 45 Ω
Replace the Q4 Vehicle Level Control Solenoid Valve.
- If between 18 - 45 Ω
- If not between 18 - 45 Ω
- Test for infinite resistance between the control terminal C and ground.
- If less than infinite resistance
Replace the Q4 Vehicle Level Control Solenoid Valve.
- If infinite resistance
- If less than infinite resistance
- All OK.