Rearview Driver Information Camera Replacement (Without DRZ)

Fig 1: Rearview Driver Information Camera

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the liftgate trim finish panel. Refer to Liftgate Trim Finish Panel Replacement .
1	Rearview Driver Information Camera Procedure Disconnect the electrical connector. Depress the clip fingers and push outward to remove the camera from the panel. Calibrate the driver information camera. Refer to Video Processing Control Module Calibration .

Callout

Component Name

Preliminary Procedure
Remove the liftgate trim finish panel. Refer to Liftgate Trim Finish Panel Replacement .

Rearview Driver Information Camera

Procedure

Disconnect the electrical connector.
Depress the clip fingers and push outward to remove the camera from the panel.
Calibrate the driver information camera. Refer to Video Processing Control Module Calibration .