Circuit/System Verification
- Ignition ON.
- Verify the scan tool Exterior Liftgate Window Unlatch Switch parameter changes between Active and Inactive when pressing and releasing the S141 Liftgate Window Unlatch Switch.
- If the parameter does not change
Refer to Circuit/System Testing - Liftgate Window Switch Inoperative.
- If the parameter changes
- If the parameter does not change
- Verify the M33 Liftgate Window Latch Assembly releases the liftgate window when pressing and releasing the S141 Liftgate Window Unlatch Switch.
- If the liftgate window does not release
Refer to Circuit/System Testing - Liftgate Window Latch Inoperative.
- If the liftgate window does release
- If the liftgate window does not release
- All OK.
NOTE:
The M33 Liftgate Window Latch Assembly will be disabled if the body control module has detected that the M45 Rear Wiper Motor is Active, verify the function of the M45 Rear Wiper Motor prior to commanding the M33 Liftgate Window Latch Assembly. Refer to Rear Wiper System Malfunction