Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Perform the scan tool control function:Green Indicator Command - On and Off
Verify the component turns On and Off:Green Indicator
- If the component does not turn On and Off
Refer to: Circuit/System Testing
- If the component turns On and Off
- If the component does not turn On and Off
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
Verify the DTC does not set.
- If the DTC sets
Refer to: Circuit/System Testing
- If the DTC is not set
- If the DTC sets
- All OK.