LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2017 >> XT5 Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed And MOVEABLE Window System >> Diagnostic Information and Procedures >> Power Windows Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Perform the scan tool control function:Driver Window Motor - Up & Down

    Verify the component operates in both directions:M74D Window Motor - Driver

    • If not the specified state 

      Refer to: Circuit/System Testing - Test 1

    • If the specified state 
  3. S79D Window Switch - Driver - Not Pressed

    Verify the scan tool parameter:

    • Left Rear Window Main Control Down Switch=Inactive
    • Left Rear Window Main Control Express Switch=Inactive
    • Left Rear Window Main Control Up Switch=Inactive
    • Right Rear Window Main Control Down Switch=Inactive
    • Right Rear Window Main Control Express Switch=Inactive
    • Right Rear Window Main Control Up Switch=Inactive
    • Front Passenger Window Main Control Down Switch=Inactive
    • Front Passenger Window Main Control Express Switch=Inactive
    • Front Passenger Window Main Control Up Switch=Inactive
    • If not the specified state 

      Replace the component:S79D Window Switch - Driver

    • If the specified state 
  4. Operate the component:Driver Left Front Window Switch - Pulled=Up & Release

    Verify the component works as specified:M74D Window Motor - Driver =Express Up

    1. Operate the component:Driver Left Front Window Switch - Test all positions of the switch and verify that all according functions work properly.
    • M74D Window Motor - Driver =Up
    • M74D Window Motor - Driver =Express Up
    • M74D Window Motor - Driver =Down
    • M74D Window Motor - Driver =Express Down
    • If not the specified state 

      Refer to: Circuit/System Testing - Test 2

    • If the specified state 
  5. Operate the component:S79D Window Switch - Driver-Left Rear Window Switch - Pressed & Pulled

    Verify the scan tool parameter:

    • Left Rear Window Main Control Down Switch=Active
    • Left Rear Window Main Control Express Switch=Active
    • Left Rear Window Main Control Up Switch=Active
    • If not the specified state 

      Replace the component:S79D Window Switch - Driver

    • If the specified state 
  6. Operate the component:S79D Window Switch - Driver-Right Rear Window Switch - Pressed & Pulled

    Verify the scan tool parameter:

    • Right Rear Window Main Control Down Switch=Active
    • Right Rear Window Main Control Express Switch=Active
    • Right Rear Window Main Control Up Switch=Active
    • If not the specified state 

      Replace the component:S79D Window Switch - Driver

    • If the specified state 
  7. Operate the component:S79D Window Switch - Driver-Right Front Window Switch - Pressed & Pulled

    Verify the scan tool parameter:

    • Front Passenger Window Main Control Down Switch=Active
    • Front Passenger Window Main Control Express Switch=Active
    • Front Passenger Window Main Control Up Switch=Active
    • If not the specified state 

      Replace the component:S79D Window Switch - Driver

    • If the specified state 
  8. Perform the scan tool control function:Passenger Window Motor - Up & Down

    Verify the component operates in both directions:M74P Window Motor - Passenger

    • If not the specified state 

      Refer to: Circuit/System Testing - Test 1

    • If the specified state 
  9. Operate the component:S79P Window Switch - Passenger - Pulled=Up & Release

    Verify the component works as specified:M74P Window Motor - Passenger =Express Up

    1. Operate the component:S79P Window Switch - Passenger - Test all positions of the switch and verify that all according functions work properly.
    • M74P Window Motor - Passenger =Up
    • M74P Window Motor - Passenger =Express Up
    • M74P Window Motor - Passenger =Down
    • M74P Window Motor - Passenger =Express Down
    • If not the specified state 

      Refer to: Circuit/System Testing - Test 3

    • If the specified state 
  10. S79LR Window Switch - Left Rear - Not Pressed

    Verify the scan tool parameter:Left Rear Window Switch at Door=Inactive

    • If not the specified state 

      Refer to: Circuit/System Testing - Test 4

    • If the specified state 
  11. Operate the component:S79LR Window Switch - Left Rear - Pressed & Pulled

    Verify the scan tool parameter:

    • Left Rear Window Switch at Door=Up
    • Left Rear Window Switch at Door=Down
    • Left Rear Window Switch at Door=Express Down
    • If not the specified state 

      Refer to: Circuit/System Testing - Test 4

    • If the specified state 
  12. S79RR Window Switch - Right Rear - Not Pressed

    Verify the scan tool parameter:Right Rear Window Switch at Door=Inactive

    • If not the specified state 

      Refer to: Circuit/System Testing - Test 4

    • If the specified state 
  13. Operate the component:S79RR Window Switch - Right Rear - Pressed & Pulled

    Verify the scan tool parameter:

    • Right Rear Window Switch at Door=Up
    • Right Rear Window Switch at Door=Down
    • Right Rear Window Switch at Door=Express Down
    • If not the specified state 

      Refer to: Circuit/System Testing - Test 4

    • If the specified state 
  14. Perform the scan tool control function:Left Rear Window Motor - Up & Down

    Verify the component operates in both directions:M74LR Window Motor - Left Rear

    • If not the specified state 

      Refer to: Circuit/System Testing - Test 4

    • If the specified state 
  15. Perform the scan tool control function:Right Rear Window Motor - Up & Down

    Verify the component operates in both directions:M74RR Window Motor - Right Rear

    • If not the specified state 

      Refer to: Circuit/System Testing - Test 4

    • If the specified state 
  16. All OK.
scientia non olet · About LEMON Manuals