Circuit/System Verification
- Ignition ON.
- Verify that no other DTCs are set except for DTC P155E, DTC P155F, or DTC P156E
- If any other DTCs are set
- If no other DTCs are set
- Replace the T19 Power Supply Transformer.
- Verify DTC P155E, DTC P155F, or DTC P156E does not set while operating the vehicle within the conditions for running the DTC.
- If any of the DTCs are set
Replace the K20 Engine Control Module.
- If none of the DTCs are set
- If any of the DTCs are set
- All OK