LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2017 >> XT5 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LGX) - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (AWD) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING:

Refer to Diesel/Gasoline Vapors Warning .

WARNING:

Refer to Safety Glasses Warning .

  1. Remove Fuel Tank. Refer to Fuel Tank Replacement (AWD) 
    2. Fig 1: Electrical Connectors, Canister Vent Hose And Fuel Pump Feed Hose
    GM4295098Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect Electrical Connectors (1) (Qty: 2)
  3. Disconnect Evaporative Emission Canister Vent Hose (2). Refer to Plastic Collar Quick Connect Fitting Service 
  4. Disconnect Fuel Pump Fuel Feed Hose (3). Refer to Plastic Collar Quick Connect Fitting Service 
    5. Fig 2: Fuel Pump Lock Ring
    GM4295125Courtesy of GENERAL MOTORS COMPANY
  5. Remove Fuel Pump Lock Ring (1) using CH 45722  Fuel Sender Lock Ring Wrench
    6. Fig 3: Transfer Pipe And Fuel Pump Vent Pipe
    GM4295431Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect Transfer Pipe (1). Refer to Plastic Collar Quick Connect Fitting Service 
  7. Disconnect Fuel Pump Vent Pipe (2). Refer to Plastic Collar Quick Connect Fitting Service 
    8. Fig 4: Fuel Tank Fuel Pump Module And O-Ring
    GM4295433Courtesy of GENERAL MOTORS COMPANY
  8. Remove Fuel Tank Fuel Pump Module (1)
  9. Remove and DISCARD O-Ring (2)
scientia non olet · About LEMON Manuals