Circuit/System Verification
- Ignition ON/Vehicle in Service Mode.
- Verify the scan tool Transmission Park Position Switch 1 and Transmission Park Position Switch 2 is between 55% - 70% when the Park Button Switch is not being pressed on the Transmission Shift Lever assembly.
- If parameter is not between 55% - 70%
Test or replace the S3 Transmission Shift Lever and S156 Transmission Shift Lever Knob.
- If parameter is between 55% - 70%
- If parameter is not between 55% - 70%
- Verify the scan tool Transmission Park Position Switch 1 and Transmission Park Position Switch 2 changes to 35% - 45% when the Park Button Switch is pressed on the Transmission Shift Lever assembly.
- If parameter does not change to 35% - 45%
Test or replace the S3 Transmission Shift Lever and S156 Transmission Shift Lever Knob.
- If parameter is between 35% - 45%
- If parameter does not change to 35% - 45%
- All OK.