Conditions for Setting the DTC

P082B 

The chassis control module detects a low duty cycle percentage, in the Transmission Range Selector X Position Sensor 1 Circuit for 1 s. Low duty cycle is considered less than 5%. Failure must be present for 7 out of 9 samples.

P082C 

The chassis control module detects a high duty cycle percentage, in the Transmission Range Selector X Position Sensor 1 Circuit for 1 s. High duty cycle is considered greater than 95%. Failure must be present for 7 out of 9 samples.

P082A 

The chassis control module detects a circuit performance condition, in the Transmission Range Selector X Position Sensor 1 Circuit for 1 s. Failure must be present for 7 out of 9 samples.

P082E 

The chassis control module detects a low duty cycle percentage, in the Transmission Range Selector Y Position Sensor 1 Circuit for 1 s. Low duty cycle is considered less than 5%. Failure must be present for 7 out of 9 samples.

P082F 

The chassis control module detects a high duty cycle percentage, in the Transmission Range Selector Y Position Sensor 1 Circuit for 1 s. High duty cycle is considered greater than 95%. Failure must be present for 7 out of 9 samples.

P082D 

The chassis control module detects a circuit performance condition, in the Transmission Range Selector Y Position Sensor 1 Circuit for 1 s. Failure must be present for 7 out of 9 samples.