Circuit/System Verification
- Ignition ON/Vehicle in Service Mode.
- Verify the scan tool Shift Interlock Switch 1 and Shift Interlock Switch 2 is between 67% - 85% when the Park Button Switch is not being pressed on the Transmission Shift Lever assembly.
- If parameter is not between 67% - 85%
Test or replace the S3 Transmission Shift Lever and S156 Transmission Shift Lever Knob.
- If parameter is between 67% - 85%
- If parameter is not between 67% - 85%
- Verify the scan tool Shift Interlock Switch 1 and Shift Interlock Switch 2 changes to 50% - 60% when the Shift Interlock Button is pressed on the Transmission Shift Lever assembly.
- If parameter does not change to 50% - 60%
Test or replace the S3 Transmission Shift Lever and S156 Transmission Shift Lever Knob.
- If parameter is between 50% - 60%
- If parameter does not change to 50% - 60%
- All OK.