LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2017 >> XTS Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Power Seat System >> Diagnostic Information and Procedures >> DTC B2755 or B2765: Memory Select/Set Switch Circuit >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON.
  2. Verify the appropriate scan tool Driver or Passenger Seat Memory Recall Switches parameter changes between Inactive and Memory 1 when pressing the memory 1 switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  3. Verify the scan tool Seat Memory Recall Switches parameter changes between Inactive and Memory 2 when pressing the memory 2 switch.
    • If the parameter does not change 

      Test or replace the S47 Seat Memory Switch.

    • If the parameter changes 
  4. Verify the scan tool Seat Memory Recall Switches parameter changes between Inactive and Exit when pressing the EXIT switch.
    • If the parameter does not change 

      Test or replace the S47 Seat Memory Switch.

    • If the parameter changes 
  5. Verify the scan tool Seat Memory Recall Switches parameter changes between Inactive and Set when pressing the SET switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  6. All OK.
scientia non olet · About LEMON Manuals