Circuit/System Verification
- Ignition ON.
- Verify the fuel pump turns ON and OFF when commanding the Fuel Pump Enable On and Off with a scan tool.
- If the fuel pump does not turn ON and OFF
Refer to Circuit/System Testing.
- If the fuel pump turns ON and OFF
- If the fuel pump does not turn ON and OFF
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC sets
- All OK.