Circuit/System Verification

Verify the component operates in both directions:M74D Window Motor - Driver

• If not the specified state 

  Refer to: Circuit/System Testing - Test 1

• If the specified state 

Verify the scan tool parameter:

• Left Rear Window Main Control Down Switch=Inactive
• Left Rear Window Main Control Express Switch=Inactive
• Left Rear Window Main Control Up Switch=Inactive
• Right Rear Window Main Control Down Switch=Inactive
• Right Rear Window Main Control Express Switch=Inactive
• Right Rear Window Main Control Up Switch=Inactive
• Front Passenger Window Main Control Down Switch=Inactive
• Front Passenger Window Main Control Express Switch=Inactive
• Front Passenger Window Main Control Up Switch=Inactive

• If not the specified state 

  Replace the component:S79D Window Switch - Driver

• If the specified state 

Verify the component works as specified:M74D Window Motor - Driver =Express Up

• If not the specified state 

  Use the following procedure: Window Motor Programming - Express Function .

1. Operate the component:Driver Left Front Window Switch - Test all positions of the switch and verify that all according functions work properly.

• M74D Window Motor - Driver =Up
• M74D Window Motor - Driver =Express Up
• M74D Window Motor - Driver =Down
• M74D Window Motor - Driver =Express Down

• If not the specified state 

  Refer to: Circuit/System Testing - Test 2

• If the specified state 

Verify the scan tool parameter:

• Left Rear Window Main Control Down Switch=Active
• Left Rear Window Main Control Express Switch=Active
• Left Rear Window Main Control Up Switch=Active

• If not the specified state 

  Replace the component:S79D Window Switch - Driver

• If the specified state 

Verify the scan tool parameter:

• Right Rear Window Main Control Down Switch=Active
• Right Rear Window Main Control Express Switch=Active
• Right Rear Window Main Control Up Switch=Active

• If not the specified state 

  Replace the component:S79D Window Switch - Driver

• If the specified state 

Verify the scan tool parameter:

• Front Passenger Window Main Control Down Switch=Active
• Front Passenger Window Main Control Express Switch=Active
• Front Passenger Window Main Control Up Switch=Active

• If not the specified state 

  Replace the component:S79D Window Switch - Driver

• If the specified state 

Verify the scan tool parameter:Child Security Lock/Window Lockout Switch=ON & OFF

• If not the specified state 

  Refer to:Power Door Child Lock Malfunction

• If the specified state 

Verify the component turns On and Off:Child Security Lock Indicator

• If the component does not turn On and Off 

  Replace the component:S79D Window Switch - Driver

• If the component turns On and Off 

Verify the component operates in both directions:M74P Window Motor - Passenger

• If not the specified state 

  Refer to: Circuit/System Testing - Test 1

• If the specified state 

Verify the component works as specified:M74P Window Motor - Passenger =Express Up

• If not the specified state 

  Use the following procedure: Window Motor Programming - Express Function .

1. Operate the component:S79P Window Switch - Passenger - Test all positions of the switch and verify that all according functions work properly.

• M74P Window Motor - Passenger =Up
• M74P Window Motor - Passenger =Express Up
• M74P Window Motor - Passenger =Down
• M74P Window Motor - Passenger =Express Down

• If not the specified state 

  Refer to: Circuit/System Testing - Test 3

• If the specified state 

Verify the component operates in both directions:M74LR Window Motor - Left Rear

• If not the specified state 

  Refer to: Circuit/System Testing - Test 1

• If the specified state 

Verify the component works as specified:M74LR Window Motor - Left Rear =Express Up

• If not the specified state 

  Use the following procedure: Window Motor Programming - Express Function .

1. Operate the component:S79LR Window Switch - Left Rear - Test all positions of the switch and verify that all according functions work properly.

• M74LR Window Motor - Left Rear =Up
• M74LR Window Motor - Left Rear =Express Up
• M74LR Window Motor - Left Rear =Down
• M74LR Window Motor - Left Rear =Express Down

• If not the specified state 

  Refer to: Circuit/System Testing - Test 4

• If the specified state 

Verify the component operates in both directions:M74RR Window Motor - Right Rear

• If not the specified state 

  Refer to: Circuit/System Testing - Test 1

• If the specified state 

Verify the component works as specified:M74RR Window Motor - Right Rear =Express Up

• If not the specified state 

  Use the following procedure: Window Motor Programming - Express Function .

1. Operate the component:S79RR Window Switch - Right Rear - Test all positions of the switch and verify that all according functions work properly.

• M74RR Window Motor - Right Rear =Up
• M74RR Window Motor - Right Rear =Express Up
• M74RR Window Motor - Right Rear =Down
• M74RR Window Motor - Right Rear =Express Down

• If not the specified state 

  Refer to: Circuit/System Testing - Test 5

• If the specified state 

Verify the function:

• S79LR Window Switch - Left Rear=Disabled
• S79RR Window Switch - Right Rear=Disabled

• If not the specified state 

  Refer to:Power Door Child Lock Malfunction

• If the specified state