Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Hold Down Retainer Fastener | 10 N.m (89 lb in) |
| Battery Negative Cable to Battery Post Fastener | 4.5 N.m (40 lb in) |
| Battery Negative Cable to Engine Block Fastener | 25 N.m (18 lb ft) |
| Battery Negative Cable to Frame Rail Ground Stud Fastener | 9 N.m (80 lb in) |
| Battery Positive Cable Conduit Bracket to Starter Solenoid Fastener (LF3) | 9 N.m (80 lb in) |
| Battery Positive Cable to Battery Fuse Block Fastener | 22 N.m (16 lb ft) |
| Battery Positive Cable to Battery Post Fastener | 4.5 N.m (40 lb in) |
| Battery Positive Cable to Generator Fastener | 15 N.m (11 lb ft) |
| Battery Positive Cable to Starter Solenoid Fastener | 9 N.m (80 lb in) |
| Battery Tray Fastener | 15 N.m (11 lb ft) |
| Body Harness Negative Ground Terminal to Negative Battery Clamp Fastener | 9 N.m (80 lb in) |
| Generator BAT Terminal Fastener | 15 N.m (11 lb ft) |
| Generator Bracket Fastener (LFX) | 22 N.m (16 lb in) |
| Generator Mounting Fastener | 58 N.m (43 lb ft) |
| Generator Mounting Stud | 9 N.m (80 lb in) |
| Starter Heat Shield Fastener (LFX) | 5 N.m (44 lb in) |
| Starter Motor Mounting Fastener | 58 N.m (43 lb ft) |