LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2017 >> XTS Base >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Column Tilt Wheel and Telescope Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column Tilt Wheel and Telescope Control Module Replacement

Fig 1: Steering Column Tilt Wheel & Telescope Control Module
GM2770171Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove Steering Column Upper Trim Cover. Refer to Steering Column Upper Trim Cover Replacement 
  2. Remove Steering Column Lower Trim Cover. Refer to Steering Column Lower Trim Cover Replacement 
  3. Remove Instrument Panel Knee Bolster. Refer to Instrument Panel Knee Bolster Replacement
1 Steering Column Tilt Wheel and Telescope Control Module Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
3 N.m (27 lb in)
2 Steering Column Tilt Wheel and Telescope Control Module

Procedure

  1. Disconnect the electrical connectors.
  2. After installation and before the steering column upper and lower trim covers are installed, relearn the soft and hard stops. Refer to Steering Column Tilt Wheel and Telescope Control Module Learn 
NOTE:

In order to relearn the steering column soft and hard stops, the steering column MUST be mounted and fastened and the steering column upper and lower trim covers CANNOT be installed.