Input Shaft Bearing Retainer Front Seals Installation

Special Tools

• DT-305-1/KM-305-1  Remover/Installer
• DT-49952  Installer

For equivalent regional tools, refer to Special Tools .

Fig 1: Input Shaft Front (Inner) Seal & Special Tool
Courtesy of GENERAL MOTORS COMPANY
NOTE:

Install the NEW seal with the notched surface of the seal facing the installer tool.

1. Install the input shaft front (inner) seal (1), to the transfer case using the DT-49952  installer (2) and DT-305-1/KM-305 - 1  remover/installer (3).
Fig 2: View Of Input Shaft Front Seal & Special Tool DT-49952
Courtesy of GENERAL MOTORS COMPANY
NOTE:

Install the NEW seal with the notched surface of the seal facing the installer tool.

2. Install the input shaft front (outer) seal (1), to the transfer case using the DT-49952  installer (2) and DT-305-1/KM-305 - 1  remover/installer (3).