October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Forward Range Radar Module Replacement
Courtesy of GENERAL MOTORS COMPANY
| Callout |
Component Name |
Preliminary Procedure
Remove Front Bumper Fascia. Refer to Front Bumper Fascia Replacement |
| 1 |
Forward Range Radar Module Nut (Qty: 3)
9 N.m (80 lb in) |
| 2 |
Forward Range Radar Module Procedure
- Disconnect the electrical connector.
- Perform the necessary programming and setup procedure: Control Module References
- Use a digital angle gauge to align the forward range radar module vertically (at the edge or on the bracket behind the module).
NOTE:
- The digital angle gauge must have an accuracy of ±0.5 degrees (9 mm/m).
- The vertical position of forward range radar module is 90 degrees (±3 degrees).
|