Radio Control Assembly Replacement

Callout	Component Name
Preliminary Procedure Radio Front Center Speaker Grille Replacement Front Floor Console Trim Plate Replacement
1	Instrument Panel Accessory Center Trim Plate Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Radio Control Procedure Disconnect the electrical connector. Transfer components as necessary. Refer to Control Module References for programming and setup procedures, if required.

Callout

Component Name

Preliminary Procedure

Instrument Panel Accessory Center Trim Plate Bolt [4x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Radio Control

Procedure

Disconnect the electrical connector.
Transfer components as necessary.
Refer to Control Module References for programming and setup procedures, if required.