Installation Procedure
Generator Control Module Coolant Pump (2)@Generator Control Module Coolant Pump Bracket - Install
- Generator Control Module Coolant Pump Bracket Nut (1)@Generator Control Module Coolant Pump Bracket - Install and tighten [2x]9 N.m (80 lb in)
- Electrical Connector@Generator Control Module Coolant Pump - Connect
Drive Motor Generator Control Module Radiator Inlet Hose (2)@Generator Control Module Coolant Pump - Install - Drive Motor Generator Control Module Radiator Inlet Hose Replacement
Drive Motor Generator Control Module Coolant Pump Hose (2)@Generator Control Module Coolant Pump - Install - Drive Motor Generator Control Module Coolant Pump Hose Replacement
- Fill the power electronics and auxiliary radiator cooling system. Power Electronics and Auxiliary Radiator Drain and Fill (LTG HP9)
- Enable the high voltage system. High Voltage Enabling
- Start the engine and check for coolant leaks.
CAUTION:
Refer to Fastener Caution .