Installation Procedure
Generator Control Module Coolant Radiator Bracket (1) - Install
- CAUTION:
Refer to Fastener Caution .
Generator Control Module Coolant Radiator Bracket Nut (1)@Generator Control Module Coolant Radiator Bracket - Install and tighten [2x] 9 N.m (80 lb in)
Generator Control Module Coolant/Air Separator (1) - Install - Generator Control Module Coolant/Air Separator Replacement
- Fill the power electronics and auxiliary radiator cooling system. Power Electronics and Auxiliary Radiator Drain and Fill (LTG HP9)
- Enable the high voltage system. High Voltage Enabling
- Start the engine and check for coolant leaks.