Installation Procedure
Generator Control Module Coolant Tank Hose (2)@Heater Inlet Pipe Connector - Install
- Generator Control Module Coolant Tank Hose Retainer (1)@Generator Control Module Coolant Tank Hose (2) - Engage
Generator Control Module Coolant/Air Separator (1) - Install - Generator Control Module Coolant/Air Separator Replacement
- Fill the power electronics and auxiliary radiator cooling system. Power Electronics and Auxiliary Radiator Drain and Fill (LTG HP9)
- Enable the high voltage system. High Voltage Enabling
- Start the engine and check for coolant leaks.