Component Testing
- Vehicle OFF, disconnect the harness connector at the S58B Rear Compartment Lid Unlatch Switch-Interior.
- Test for infinite resistance between the signal terminal 2 and the B+ terminal 1 with the switch in the open position.
- If less than infinite resistance
Replace the S58B Rear Compartment Lid Unlatch Switch-Interior.
- Go to next step: If infinite resistance
- If less than infinite resistance
- Test for less than 3 Ω between the signal terminal 2 and the B+ terminal 1 with the switch in the closed position.
- If 3 Ω or greater
Replace the S58B Rear Compartment Lid Unlatch Switch-Interior.
- Go to next step: If less than 3 Ω
- If 3 Ω or greater
- All OK