LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Monitoring System >> Diagnostic Information and Procedures >> DTC B392D >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition ON.
  2. Verify the B292 Driver Monitoring System Cameracoax cable is properly connected at all components, and there is no damage to the cable or connections.
    • If connection problems or cable damage is noted 

      Perform the appropriate repair or replacement to correct any issues

    • Go to next step: If no connection problems or cable damage is noted 
  3. Verify DTC B392D 39 is not set.
    • If the DTC is set 

      Replace the B292 Driver Monitoring System Camera

    • Go to next step: If the DTC is not set 
  4. Verify DTC B392D 58 is not set.
    • If DTC is set 
    1. Clean the Replace the B292 Driver Monitoring System Camera.
    2. Verify the camera is mounted correctly.
      • If the camera is incorrectly mounted, remove and reinstall camera
      • Go to next step: If the camera is mounted correctly
    3. Replace the B292 Driver Monitoring System Camera.
    • Go to next step: If the DTC is not set 
  5. All OK.
scientia non olet · About LEMON Manuals