Circuit/System Testing

Ignition ON.
Verify the USB cable is properly connected at all components and in-line connections, and there is no damage to the cable or connections.
- If connection problems or cable damage is noted
  Perform the appropriate repair or replacement to correct any issues
- Go to next step: If no connection problems or cable damage is noted
Replace the P16 Instrument Cluster
Verify the Night Vision System operates normally.
- If Night Vision System operates normally
  All OK.
- Go to next step: If Night Vision System does not operate normally
Replace the K172 Night Vision Control Module
Verify the Night Vision System operates normally.
- If Night Vision System operates normally
  All OK.
- Go to next step: If Night Vision System does not operate normally
Test or replace the B276 Night Vision Camera.