LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2018 >> CT6 Plug-In >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Lock Control System >> Diagnostic Information and Procedures >> DTC B270A >> Component Testing
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Testing

  1. Ignition OFF, disconnect the harness connector at the S3 Transmission Shift Lever.
  2. Install a 3 A fused jumper wire between the control terminal 4 and 12 V. Momentarily install a jumper wire between the ground terminal 2 and ground.
  3. Verify the M7 Transmission Shift Lock Control Solenoid Actuator turns on and off/clicks, etc.
    • If the M7 Transmission Shift Lock Control Solenoid Actuator does not turn on and off/clicks, etc 

      Replace the S3 Transmission Shift Lever.

    • Go to next step: If the M7 Transmission Shift Lock Control Solenoid Actuator does turn on and off/clicks, etc 
  4. All OK.
scientia non olet · About LEMON Manuals