LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Control Module Wiring Harness Replacement (Light Duty) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Position the power steering control module wiring harness to the electric belt drive rack and pinion steering gear.
    2. Fig 1: Power Steering Control Module Wiring Harness And Retaining Clips
    GM5040909Courtesy of GENERAL MOTORS COMPANY
  2. Connect the power steering control module wiring harness (1) at the electric belt drive rack and pinion steering gear.
    3. NOTE: Ensure the position and orientation of each wiring harness retaining clips before securing them.
  3. Install the 3 power steering control module wiring harness retaining clips (2) at the electric belt drive rack and pinion steering gear.
    4. Fig 2: Power Steering Control Module Wiring Harness Retaining Clips
    GM5040910Courtesy of GENERAL MOTORS COMPANY
    NOTE: Ensure the position and orientation of each wiring harness retaining clips before securing them.
  4. Install the 3 power steering control module wiring harness retaining clips (1) at the front frame crossmember.
    5. Fig 3: Power Steering Control Module Wiring Harness, Generator Battery Control Wiring Harness And Chassis Wiring Harness
    GM5040908Courtesy of GENERAL MOTORS COMPANY
  5. Connect the power steering control module wiring harness (2) at the generator battery control wiring harness (1).
  6. Connect the power steering control module wiring harness (2) at the chassis wiring harness (3).
  7. Install Steering Gear Skid Shield. Refer to Steering Gear Skid Shield Replacement
scientia non olet · About LEMON Manuals