LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2018 >> XT5 Base, FWD >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Monitor Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. GM4285192Courtesy of GENERAL MOTORS COMPANY

    Battery Monitor Module(3) - Install

    2. CAUTION:

    Refer to Fastener Caution

  2. Battery Negative Post Clamp Nut(1) - Tighten 4.5 N.m (40 lb in)
  3. Electrical Connector(2) - Connect
  4. GM4285190Courtesy of GENERAL MOTORS COMPANY

    Battery Negative Cable(3) - Install

  5. Use an open ended wrench to hold the battery sensor ground tab, while tightening the battery negative cable nut.(2)
  6. Battery Negative Cable Nut(1) - Tighten 12 N.m (106 lb in)
  7. Perform the battery sensor learn procedure. Battery Sensor Module Learn 
scientia non olet · About LEMON Manuals