LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2018 >> XT5 Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System - Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> DTC U2101 >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition ON/Vehicle In Service Mode.
  2. Verify DTC U2101 is not set.
    • If DTC U2101 is set without other DTCs set 
    1. Program the device that sets the DTC.
    2. Clear the DTC.
    3. Ignition/Vehicle OFF, remove the scan tool, open and close the driver door. Wait 60 s.
    4. Verify the DTC does not set.
      • If the DTC sets, replace the appropriate device.
      • Go to next step: If the DTC does not set
    5. All OK.
    • Go to next step: If DTC U2101 is not set 
  3. All OK