Theft Deterrent Module Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front floor console rear air duct replacement - rearward of auxiliary blower. Front Floor Console Rear Air Duct Replacement (Rearward of Auxiliary Blower)Front Floor Console Rear Air Duct Replacement (Forward of Auxiliary Blower)
1	Theft Deterrent Module Bolt[2x] CAUTION: Fastener Caution Tighten 1 N.m (9 lb in)
2	Theft Deterrent Module Procedure Disconnect the electrical connector. Release the retaining tabs. Perform the necessary programming and setup procedure:Control Module References

Callout

Component Name

Theft Deterrent Module Bolt[2x]

CAUTION:

Tighten
1 N.m (9 lb in)

Theft Deterrent Module

Procedure