Circuit/System Verification
- Ignition ON.
- Verify DTC B101D is not set.
- If DTC B101D 39 is set
- Using the scan tool, select Control Module Self Test in Configuration/Reset Functions from the Multifunction Energy Storage Capacitor Control Module menu.
- Verify the Control Module Status transitions to Unlocked and the DTC does not set.
- If the Control Module Status does not unlock or the DTC sets, replace the K186 Multifunction Energy Storage Capacitor Control Module.
- Go to next step: If the Control Module Status unlocks and the DTC does not set
- All OK.
- If DTC B101D is set, except B101D 39
Replace the K186 Multifunction Energy Storage Capacitor Control Module.
- Go to next step: If DTC B101D is not set
- All OK