LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2019 >> CT6 V >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls And Fuel - 4.2L (LTA) - Repair Instructions >> Repair Instructions >> Fuel Pump Power Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Rear Compartment Side Trim-Right Side - Remove - Rear Compartment Side Trim Replacement - Right Side
  2. {If equipped} Digital Map Module - Remove - Digital Map Module Replacement
  3. Disconnect the fuel pump power control module electrical connector.
  4. GM5081041Courtesy of GENERAL MOTORS COMPANY

    Fuel Pump Power Control Module Bracket Bolt (1) - Remove

  5. NOTE:

    Remove the fuel pump power control module and bracket as an assembly.

  6. Fuel Pump Power Control Module Bracket (2) - Remove
  7. GM5081042Courtesy of GENERAL MOTORS COMPANY

    Fuel Pump Power Control Module Nut (1) - Remove [2x]

  8. Fuel Pump Power Control Module (2) @ Fuel Pump Power Control Module Bracket (3) - Remove