Circuit/System Testing
- Ignition/Vehicle & All vehicle systems - Off
- Disconnect the electrical connector: K60 Steering Column Lock Module
- Ignition - On / Vehicle - In Service Mode
- Test for battery voltage between the test points: Control circuit terminal 4 & Ground
- If battery voltage
Repair the short to voltage on the circuit:
- Go to next step: If less than battery voltage
- If battery voltage
- Ignition Off
- Test for infinite resistance between the test points: Control circuit terminal 4 & Ground
- If less than infinite resistance
- Disconnect the electrical connector: X1@K84 Keyless Entry Control Module
- Test for infinite resistance between the test points: Control circuit terminal 4@K60 Steering Column Lock Module & Ground
- If less than infinite resistance - Repair the short to ground on the circuit.
- If infinite resistance - Replace the component: K84 Keyless Entry Control Module
- Go to next step: If infinite resistance
- Disconnect the electrical connector: X1@K84 Keyless Entry Control Module
- Test for less than 2 ohms between the test points: Control circuit terminal 4@K60 Steering Column Lock Module & The other end of the circuit
- If 2 ohms or greater - Repair the open/high resistance in the circuit.
- If less than 2 ohms - Replace the component: K60 Steering Column Lock Module