Installation Procedure
- Battery Monitor Module (1) - Install
- Battery Negative Post Clamp Nut (1) Tighten 7 N.m (62 lb in)CAUTION:
Refer to Fastener Caution .
- Battery Negative Cable Nut (3) - Install and tighten 12 N.m (106 lb in).
- Body Harness Terminal Nut (4) - Install and Tighten 9 N.m (80 lb in).
- Electrical Connector (2) - Connect
- Rear Compartment Side Trim Panel- Left Side (2) - Install - Rear Compartment Side Trim Replacement - Left Side
- Program all of the customer's radio station presets and set the radio clock to the current time.
- Perform the battery sensor learn procedure. Battery Sensor Module Learn