LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2019 >> CTS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Image Display Camera System) >> Diagnostic Information and Procedures >> DTC B395A >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify DTC B395A 4B is not set.
    • If the DTC is set 
    1. Program the K157 Video Processing Control Module.
    2. Verify DTC B395A 4B is not set after programming and performing Video Processing Control Module Calibration (with UVH) Video Processing Control Module Calibration (with UVJ) .
      • If the DTC sets after programming, replace the B87 Rearview Camera.
      • Go to next step: If the DTC does not set
    3. All OK.
    • Go to next step: If the DTC is not set 
  3. Verify DTC B395A 66 is not set.
    • If the DTC is set 

      Remove the B87 Rearview Camera and reinstall

    • Go to next step: If the DTC is not set 
  4. Verify DTC B395A 08 is not set.
    • If DTC is set 

      Refer to Circuit/System Testing

    • Go to next step: If DTC is not set 
  5. All OK.
scientia non olet · About LEMON Manuals