Side View Driver Information Camera Replacement

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Outside Rearview Mirror Housing Bezel Replacement (North America)Outside Rearview Mirror Housing Bezel Replacement (Except North America) Remove the outside rearview mirror inner actuator (North America). Outside Rearview Mirror Actuator Replacement (Except North America)Outside Rearview Mirror Actuator Replacement (North America)
1	Side View Driver Information Camera Bolt CAUTION: Fastener Caution . Tighten 1 N.m (9 lb in)
2	Side View Driver Information Camera Bracket Procedure Raise camera and bracket slightly and pull the camera and bracket out from the outside rear view mirror. NOTE: Use care when working with side view driver information camera bracket, it is not serviced separately from the outside rear view mirror.
3	Side View Driver Information Camera Procedure Disengage the retaining tab that secures the camera to the bracket. Disconnect the electrical connector.