Fastener Specifications
WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | |
| Rear Suspension Lower Control Arm Inner Bolt |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Rear Suspension Lower Control Arm Inner Nut | |
| First Pass: | 115 N.m (85 lb ft) |
| Final Pass: | 75 - 90 degrees |
| Steering Linkage Inner Tie Rod Nut | 80 N.m (59 lb ft) |