LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2019 >> CTS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Steering Wheel And Steering Column) >> Repair Instructions >> Steering Column Lock Control Module Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column Lock Control Module Replacement

WARNING: This page is about a different car, the 2018 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Steering Column Lock Control Module Components
GM4074541Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Instrument Panel Knee Bolster Replacement
  2. Floor Front Air Outlet Duct Replacement - Left Side
  3. With the vehicle in accessory mode, remove fuse to unlock the steering column lock control module - Column Lock Wiring Schematics 
1 Steering Column Lock Control Module Bolt [2x]
CAUTION:

Refer to Fastener Caution .

Procedure

  1. Remove the OLD steering column lock control module bolts.

    DISCARD the bolts.

  2. Install the NEW steering column lock control module bolts.

    Tighten the bolts until the bolt heads break off.

NOTE:

Start ALL bolts by hand before breaking the bolt heads off or misalignment of the steering column lock control module may occur.
2 Steering Column Lock Control Module Bolt [2x]
Tighten 
9.5 N.m (84 lb in)
3 Steering Column Lock Control Module
Procedure 
Program the steering column lock control module. Control Module References
scientia non olet · About LEMON Manuals