Remote Control Door Lock Receiver Replacement (4NB)

WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure High Mount Stop Lamp Electrical Connector - Disconnect
1	Remote Control Door Lock Receiver Procedure Working from underneath of back upper panel. Remove and install the remote control door lock receiver through the back upper panel center hole. Disconnect the electrical connector. Perform the necessary programming and setup procedure:Control Module References

Callout

Component Name

Preliminary Procedure
High Mount Stop Lamp Electrical Connector - Disconnect

Remote Control Door Lock Receiver

Procedure

Working from underneath of back upper panel.
Remove and install the remote control door lock receiver through the back upper panel center hole.
Disconnect the electrical connector.
Perform the necessary programming and setup procedure:Control Module References