Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Intermediate Steering Shaft Boot Clamp |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Intermediate Steering Shaft Inner Boot Bolt | 9 N.m (80 lb in) |
| Intermediate Steering Shaft Lower Bolt | 52 N.m (41 lb ft) |
| Intermediate Steering Shaft Upper Bolt | 39 N.m (29 lb ft) |
| Steering Column Lock Control Module Bolt | 9.5 N.m (84 lb in) |
| Steering Column Lower Trim Cover Bolt | 2.5 N.m (22 lb in) |
| Steering Column Nut Refer to procedure for tightening sequence and torque values. |
Steering Column Replacement |
| Steering Column Tilt Wheel and Telescope Control Module Bolt | 3 N.m (27 lb in) |
| Steering Wheel Bolt | 45 N.m (33 lb ft) |
| Steering Wheel Shroud Screw | 1.1 N.m (10 lb in) |
| Upper Intermediate Steering Shaft Upper Bolt | 42 N.m (31 lb ft) |